Remote Control - Whynter ARC-148MS Instruction Manual

REMOTE CONTROL

The portable air conditioner can be switched on by the remote control. To transmit signals from the remote con-
trol to the air conditioner, point the front part of the remote handset towards the control panel on the air condi-
tioner. Reception of the signal is confirmed by a beep. The maximum signal transmission distance is approxi-
mately 8 meters / 26 feet.
NOTE:
 Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause
interferences
 Electronic and fluorescent lamps may interfere with the signal transmissions between the remote control
and the air conditioner
 Remove the batteries if the remote control is not used for long periods
INSTALLING BATTERIES
To insert the batteries, open the flap on the back of the remote control by sliding if off. Strictly adhere to the
polarity signs on the bottom of the battery housing, close the flap once the batteries have been inserted.
 Only use two dry LR03 AAA 1.5V Batteries (included) in the remote control
 Always change both batteries at the same time
INDICATOR
1 – Mode Indicator
2 – Lock Indicator
3 – Temp./Timer Display
4 – Fan (High)
5 – Fan (Medium)
6 – Fan (Low)
7 – Timer Indicator
BUTTONS
8 – Down Button
9 – Up Button
10 – Mode Button
11 – On/Off Button
12 – Fan Speed Button
13 – Swing Button
14 – Sleep Button
15 – Timer On Button
16 – Reset Button
17 – Timer Off Button
18 – Lock Button
19 – LED Display Button
FUNCTION
Displays the current selected
mode
(Auto, Cool, Dry, or Fan)
Indicates current setting is
locked and cannot be changed
Displays set temperature
Displays the selected high fan
speed
Displays the selected medium
fan speed
Displays the selected low fan
speed
Indicates Timer mode activated
FUNCTION
Decreases set temperature/time
Increases set temperature/time
Controls the 4 function modes:
Auto, Cool, Dry, & Fan
Turns the unit On and Off
Controls the fan speeds: High,
Medium, Low or Auto
Starts or stops louver movement
and set louver angle.
Enables Sleep mode
Enables the On timer & set timer
hours
Cancels all settings
Enables the Off timer & set timer
hours
Locks and Unlocks current set-
ting
Turns on and off the display light
14