Table of Contents
Advertisement
Important Safety Information
Safety Labels
Your Powered Rake comes equipped with all safety
labels in place. They were designed to help you safely
operate your implement. Read and follow their
directions.
1.
Keep all safety labels clean and legible.
2.
Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer or visit our
dealer locator at landpride.com.
3.
Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
4
PR2572 & PR2596 Powered Rakes 314-132M
Table of Contents
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a.
Clean the area the label is to be placed.
b.
Spray soapy water on the surface where the label is to
be placed.
c.
Peel backing from label. Press firmly onto the surface.
d.
Squeeze out air bubbles with the edge of a credit card.
818-130C
15809
Caution: 540 RPM
818-229C
Amber Reflector (Both Sides)
15810
818-230C
15813
Red Reflector (Both Sides)
Land Pride
6/06/06
Advertisement
Table of Contents
