Table of Contents
Advertisement
ACL Type: ICMP
This section provide ICMP ACL configuration, the screen in
Configuration object of the Switch.
O
Object
ACL Type:
Provide various ACL type and available options are MAC, IP, TCP, UDP, ICMP. The default ACL Type
is IP.
ACL Name:
Allow input the ACL Name and maximum length is 10 characters.
Source IP Address:
Allow input the Source IP Address and the format must be "XXX.XXX.XXX.XXX".
Subnet Mask:
Allow input the Source Subnet Mask address and the format must be "XXX.XXX.XXX.XXX".
Destination IP Address: Allow input the Destination IP Address and the format must be "XXX.XXX.XXX.XXX".
Subnet Mask:
Allow input the Destination Subnet Mask address and the format must be "XXX.XXX.XXX.XXX".
Permit/Deny:
Allow choosing "PERMIT" or "DENY" option and default is "PERMIT".
Capture:
Allow enable (ON) or disable (OFF) the capture ability and default is "OFF".
Policy Name:
Allow use user configured policy by choose specific policy; create new policy by press "Policy
Setup" button. Default is "NULL".
DSCP (0-63):
Allow input DCSP value and available range from 0 to 63. Default is "No value".
Counter:
Allow input Counter information and maximum length is 10 characters. Default is "No Information".
Add button
Press this button to add configured TCP ACL to ACL table.
Reset button
Press this button to clear whole input information that not complete setting procedure.
Policy Setup button
Provide Traffic Shaping Configuration Web screen for add QoS policy. The screen in
4-42
Figure 4-46 ICMP ACL Configuration Web Screen
Description
appears and
describes the Traffic Shaping Configuration object of the Switch.
Table 4-13
Table 4-17 Descriptions of the ICMP ACL Type Web Screen Objects
appears and
Figure 4-46
Table 4-17
-53-
User's Manual of GSW-4804SF
describes the ICMP ACL
Figure
Advertisement
Table of Contents
