Table of Contents
Advertisement
3.2 Administrator Console Access
The administration console is a local connection method between the administrator PC and the Switch. Using this method, you
can reset the Switch to factory default mode from a personal computer, Apple Macintosh, or workstation connected to the
Switch's console (Serial) port. Direct access to the administration console is achieved by directly connecting a terminal or a PC
equipped with a terminal-emulation program (such as HyperTerminal) to the Switch console (Serial) port.
When using this management method, a null-modem cable is required to connect the Switch to the PC. After making this
connection, configure the terminal-emulation program to use the following parameters:
The default parameters are:
9600 bps
8 Data bits
No Parity
1 Stop bits
No Flow Control
After log on the Switch. This Console interface is often preferred for remain connected and monitor the system during save
current system configuration or system reboots.
-17-
User's Manual of GSW-4804SF
Advertisement
Table of Contents
