Nikon Coolpix P6000 User Manual page 166

Continuous mode Built-in flash Flash units
-
-
Single
Available Available
Continuous
Off Available
-_.
BSS Off Not available
Continuous flash
Available Not available
-
Multi-shot 16
Off Available
Intvl timer shooting Available Available
-
-
-~
-
Shooting Options: The Shooting Menu
AF area mode
When AF area mode is set to Center while Metering is set to Spot AF area, the
Metering setting will automatically change to Matrix. When a setting other than
Center is selected for AF area mode, the Metering setting automatically reverts
back to Spot AF area.
Noise reduction
• When Auto
of
Noise reduction is applied with Continuous set to an option
other than Single or Intvl timer shooting, or with Auto bracketing set to an
option other than Off, noise reduction will not be performed.
• Selecting On
for
Noise reduction changes all modes to Single, when an option
other than Intvl timer shooting is selected for Continuous, and Auto
bracketing is changed to Off.
Wide-angle converter
Selecting On
for
Wide-angle converter changes the flash mode to (!)
(off).
Distortion control
• When Distortion control is set to On, Continuous is automatically set to Single
and Auto bracketing is set to Off.
• Even when the Distortion control option is changed back to Off, Continuous
will still be set to Single and Auto bracketing will still be set to Off.
Built-in flash, Speedlights (available separately from Nikon)
8uilt-in flash and Speedlight S8-400, S8-600, S8-800, or S8-900 flash unit (available
separately from Nikon) operation is restricted, as shown below, depending upon the
VI
:T
applied Continuous setting.
o
o
.....
~
lO
-0
Q)
'<
( j
Q)
n
7'
Q)
~
Q..
VI
I'D
.....
t::
"0
$
~
When a flash unit (available separately from Nikon) is mounted on the camera's
5; accessory shoe, the built-in flash is automatically set to
@.
752