Installing/Removing The Cabinet; Rear Cover Assembly - Sony FWD-50PX1 Service Manual

1-2. Installing/Removing the Cabinet

n
When installing/removing the cabinet and replacing the board, place the unit on the conductive cushion.

1-2-1. Rear Cover Assembly

1. Loosen the two panel securing screws, then remove the U1 block assembly. (FWD-50PX1 only)
2. Remove the four screws (PSW M6 x 20), then remove the four nylon washers and four knobs.
3. Remove the fourteen screws (PSW3 x 20) and eight screws (PSW3 x 8), then remove the rear cover
assembly while holding the handle.
Nylon washer
PSW3 x 8
PSW
3 x 20
Handle
U1 block
assembly
(FWD-50PX1)
Panel securing
screws
4. Attach the rear cover assembly in the reverse order of steps 1 to 3.
1-2
PSW
M6 x 20
Knob
Handle
Handle
Rear cover assembly
Handle
PSW3 x 8
Conductive cushion
FWD-50PX1