Sony FWD-50PX1 Service Manual page 27

a) Original Data Select
Menu structure
You can select the original data that is used for editing and
copy the selected original data to the editing RAM.
Service Mode
Preset Edit
Original Data Select
Current Data Select
Table
(1) Current Data Select
When you select the signal data that is being input at
this moment for editing, move the cursor to this item
and press ENTER.
The selected data is copied to the editing RAM.
This mode is prepared for the case that the signal
specification is unknown, and you can make editing by
checking the image on screen.
Select the respective adjustment items and change the
data as desired using the ↑/↓ key or the ←/→ key. The
changed data are reflected on screen.
(If you press the ENTER key again, the screen returns
to the previous menu.)
Among the adjustment items, the three types of
adjustment [H Freq], [V Freq] and [Sync Pol] cannot
be modified.
(2) Table
When you select the data stored in the preset area,
move the cursor to this item and press ENTER. Select
the desired data using the ↑/↓ key. The selected data is
copied to the editing RAM.
This mode is prepared for the case that the signal
specification is already known. You can make adjust-
ment and edit data of all items but the modified data
are not reflected to the actual picture images.
FWD-50PX1
(1) The signal data that is being
input at this moment, is used
as the original data for editing.
(2) The data stored in the preset
area is used for editing.
2-7