Canon PIXUS iP8600 Service Manual page 17

<Service mode operation procedures>
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The LED lights
in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.)
4) When the LED lights in green, press the Resume/Cancel button the specified number of time(s) according to the function listed in the table below. (Each time
the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.)
Time(s) LED
0 times Green
1 time Orange
2 times Green
3 times Orange
4 times Green
5 times Orange
6 times Green
7 times Green
8 times Orange
9 times Green
10 times or more
5) After the function (menu) is selected, press the Power button. The LED lights in green, and the selected function is performed. (When the operation
completes, the printer returns to the menu selection mode automatically.)
<Destination settings procedures>
In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according to the destination listed in the table below, and press
the Power button.
Time(s)
1 time
2 times
3 times
4 times
5 times
6 times or
more
Note: After setting the destination, confirm the model name in service test print or EEPROM information print.
[See 3.4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
Function
Power off
Service test print
EEPROM information print
EEPROM initialization
Waste ink counter resetting
Destination settings
Print head deep cleaning
CD-R test print
CD-R print position correction
(horizontal)
CD-R print position correction
(vertical)
Return to the menu selection
LED
Orange
Japan: iP8600
Green
Other than Japan, non-support of CD-R printing (A4): iP8500
Orange Other than Japan, non-support of CD-R printing (LTR): iP8500 (LTR)
Green Other than Japan, support of CD-R printing (A4): iP8500
Orange Other than Japan, support of CD-R printing (LTR): iP8500 (LTR)
Return to the menu selection
<Part 1: 3. REPAIR, 3-3 (4) to (7)>
When the print head is not installed, the carriage returns and
locks in the home position.
See 3-4. Verification Items, (1) Service test print.
See 3-4. Verification Items, (2) EEPROM information print.
Proceed to the step 5), and follow the Destination settings
procedures.
Not used in servicing.
Not used in servicing.
Not used in servicing.
Destination
1 - 12
Remarks
To the top