Adjustment / Settings - Canon PIXUS iP8600 Service Manual

Hide thumbs Also See for PIXUS iP8600:
Table of Contents

Advertisement

3-3. Adjustment / Settings

(1) Paper feed motor adjustment
Perform the following adjustments when the paper feed motor unit is replaced:
1) When attaching the motor, fasten the screws so that the belt is properly stretched (in the direction indicated by the blue arrow in the figure below).
2) After replacement, be sure to perform the service test print, and confirm that no strange noise or faulty print operation (due to dislocation of the belt or gear,
or out-of-phase motor, etc.) occurs.
Note: The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit. DO NOT loosen them in other cases.
(2) Gear phase adjustment
In attaching the lift transmission gear (QC1-4327), adjust the phase so that the protrusion of the lift transmission gear (QC1-4327) fits into the recess of the
carriage shaft cam R (QC1-4382), as shown in the figure below.
1 - 8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma ip8500

Table of Contents