Removing Stop Switch, Recoil Starter, And Blower Housing - Wacker Neuson WM 130 Repair Manual

WM 130/170/270 Repair
8.3

Removing Stop Switch, Recoil Starter, and Blower Housing

See Graphic: wc_gr001752
8.3.1
8.3.2
8.3.3
8.3.4
wc_tx000379gb.fm
Remove the two M4 screws (a), disconnect wire, and remove the stop
switch (b).
Remove the four M6 bolts (c) and remove the recoil starter (d).
Remove the four M6 bolts (e) and remove the blower housing (f).
Also remove the two M6 bolts (g) and remove the head baffle (h).
Disassembly Procedures
41