Routing Switchers, Signal Distribution Amplifiers and Cat.5 Transmission Systems. Liability Statement Every effort has been made to ensure that this product is free of errors. TV One cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use.
IMPORTANT SAFETY INSTRUCTIONS To insure the best from this product, please read this manual carefully. Keep it in a safe place for future reference. To reduce the risk of electric shock, do not remove the cover from the unit. No user serviceable parts inside. Refer servicing to qualified personnel. Power and Connections This unit is not disconnected from the AC power source as long as it is connected to the wall outlet.
Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or TV One immediately. Have the Model Number, Serial Number and Invoice available for reference when you call.
Page 9
Connector Detail: Tilt Stand Detail Note: Installation of the tilt stand is optional and may be omitted if the monitor is to be rack mounted or secured to a wall or other sturdy vertical object using the VESA mount.
AC cable to the AC power source. 7.0 OPERATING THE UNIT The LM-1520R and LM-1920R monitors are operated using front panel controls and an On Screen Display (OSD). The controls consist of a group of six buttons located on the lower center of the front panel.
Page 12
buttons to make the adjustment. When you are through making adjustments, press the menu key again and move the cursor to the Exit selection. Press the menu button to select ‘Exit’. Adjust Switches: Adjust Switches (Adjust Buttons) are used to set the audio volume level anytime the OSD is inactive.
Page 13
Sharpness: Sets the desired enhancement value for picture. Min. ~ Max.:0~20 / Default=5 Scan Mode: Changes the display scan value: Full/Under/Over. 3D Filter: Turn 3D comb filter On/Off. PIP Mode: Allows the PIP mode to be selected. PIP Source: Allows the PIP Sub source to be selected. PIP H.
Enables auto detection of data such as clock and phase. TROUBLESHOOTING The major cause of difficulty with the LM-1520R and LM-1920R monitors is use of faulty or low quality cables, attempting to use cables over to long a distance and selecting the wrong source for what is actually connected to the monitor.
10.0 REGULATORY COMPLIANCE The LM-1520R and LM-1920R monitors have been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supply has been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. This Product and Power Adapter is RoHS Compliant.
Need help?
Do you have a question about the LM-1520R and is the answer not in the manual?
Questions and answers