Table of Contents
Advertisement
5. B. Manual Channel Search for Transponder
You can automatically search and save all TV and radio channels of
a transponder as follows :
Main Menu / Installation /
Manual Channel Search
Manual Channel Search
SYSTEM SETUP
12
■ Select Menu / Installation / Manual Channel
Search.
■ Select the transponder from the transponder list
you want to search.
If you cannot find it from the transponder list,
insert all transponder information
(i.e., Channel no, Frequency, and Bandwidth).
■ Press the OK key, and the receiver will
automatically search for all channels of the
selected transponder.
6. MENU OPERATION
The main menu is classified into several sub menus which will carry out the
various operations individually.
MAIN MENU
After installing your antenna and receiver with appropriate connectors, plug in the
AC main power and turn on the receiver.
The default factory PIN code is "0000". Press the "MENU" key or "EXIT" key to return to the
previous menu.
1. EDIT CHANNELS
Press the "MENU" key of the RCU. You
will see the "Main Menu" on the TV
screen as follows.
You can move into the desired submenu
using the "up/down" keys (▲·▼) or
numeric keys.
Press the "OK" key to confirm your
selection. If the "Main Menu" is locked,
note that you should enter the PIN code
in order to move into the corresponding
submenu such as "Edit Channels"
menu,"Edit Favorites" menu and
"Installation" menu.
You can edit channels in various
channel lists – channel lock, delete
channel, move channel, edit the name
of a channel, and sort the channel list.
Select "Edit Channels" menu in main
menu, and you will be asked to enter
your PIN code. The "Edit Channels"
screen willl be displayed.
MENU OPERATION
13
Advertisement
Table of Contents
