System Settings - OPENTEL ODT 1600C User Manual

3. D. TIME SETTING
Time Mode : Select the time mode of your receiver. In Auto mode, your
Receiver will use the information from the satellite as time
reference. In manual mode, you can set the time of your
receiver manually.
Time Adjustment : Set the time offset from the UTC (GMT). Useful in auto mode
only.
Current Time : Set the current time manually. Useful in manual mode only.
On Time : Set the time when the receiver will be automatically turned on.
Off Time : Set the time when the receiver will be automatically turned off.
3. E. RECEIVER UPGRADE
MENU OPERATION
20
You can change the time of your receiver and
also switch on/off the timer function in this menu.
Select "Time Setting" item in the "Installation"
menu and the following screen will be displayed.
You can upgade the software through the serial
port when new software is released.
Please contact the distributor for receiver
upgrade.
The distributor provides you with useful
information and new software for the receiver.
3. F. FACTORY DEFAULT
This is to restore the factory set values in case the user encounters some problems after
changing any new values of channel data or others data which may cause error.
Select "Factory Default" menu in "Installation" menu and press the "OK" key.
If you want to continue, select "Yes".
The receiver will be reset automatically.
Please note that the "Factory Default" procedure may take a few minutes.
.

4. SYSTEM SETTINGS

This menu helps you to setup video output
mode, time, screen type and other
parameters. Select "System Settings" menu in
main menu, and the following screen will be
displayed.
In order to get the signal from other receivers
instead of the antenna, set "Tuner 5V" option
to "Off". You can find "Tuner 5V" option in
"System Settings".
TV Select : Select video output mode - CVBS or RGB
Screen Type : You can choose either 4:3 or 16:9 according to the TV type.
Menu Transparency : You can select the transparency of the menu.
OSD Skin : You can choose the OSD Skin.
Tuner 5V : You can choose the tuner option.
Press the "MENU" key or "EXIT" key to return to the previous menu.
MENU OPERATION
21