OPENTEL ODT 1600C User Manual page 6

4. B. REAR PANEL
1) ANTENNA IN : Connects the aerial cable.
In order to get the signal from other receiver instead of the antenna, set "Tuner 5V"
option to "Off". You can find "Tuner 5V" option in "Automatic Channel Search".
2) TV/VCR : Connects to the RF IN of the TV or VCR using an RF cable.
3) RS-232C : Connects to the PC to update software.
4) VCR SCART : Connects to the VCR or DVD using a VCR SCART cable.
5) TV SCART : Connects to the TV using a TV SCART cable.
6) S-VIDEO : Connects to the TV or VCR using an RCA cable. (for better video quality
than that of the VIDEO
7) S/PDIF : Connects to the audio system using an S/PDIF cable. (digital audio)
8) AUDIO L/R : Connects to the TV or VCR using an RCA cable.
9) VIDEO : Connects to the TV or VCR using an RCA cable.
10) ON/OFF : Powers on/off.
HARDWARE DESCRIPTION
8
4. C. REMOTE CONTROL UNIT
1) POWER : This is used to switch the receiver to ON/STANDBY mode.
2) MUTE : This key is used to toggle between normal and muted audio.
3) 0-9 NUMERIC KEYS : These keys are used to enter numeric values and to
select the channel directly by entering its number.
4) CH▲·CH▼ : These keys are used to change channels and to browse the
menu.
▶ ▶ ▶ ▶ ◀ ◀ ◀ ◀
5) VOL ·VOL : These keys are used to vary the volume level and to change
the options in the menu.
6) MENU : This key is used to open up the menu.
7) EXIT : This key is used to exit from any menus.
8) OK : This key is used to enter and confirm any data to the in the menu
systems. The channel list can be accessed directly by pressing this key
in normal view mode.
9) Page Up : This key is used to page up the menu.
10) Page Down : This key is used to page down the menu.
11) FAV : This key is used to switch between favorite lists.
12) GUIDE : This key is used to open up the Electronic Program Guide.
13) i : This key is used to view the channel information.
14) ♬ : This key is used to toggle between the TV channel and the radio
channel.
HARDWARE DESCRIPTION
9