Firmware Upgrade Through Terrestrial; Troubleshooting - OPENTEL ODT 1600C User Manual

Table of Contents

Advertisement

7. CHANNEL GUIDE
Press the "GUIDE" key, and the following screen will be displayed.The titles of the
current and next programmes on different channels will appear.
8. AUDIO
Press the "AUDIO" key.
Select the audio mode which you want using the "left / right" keys (◀·▶).
Some programs are broadcasted with one or more alternative language soundtracks.
You can select the preferred audio language for soundtrack using the "up/down" keys
(▲∙▼).
7.

FIRMWARE UPGRADE THROUGH TERRESTRIAL

Upon installing the new receiver, please make sure it detects the new
firmware with the following procedures.
1. Turn on the receiver.
2. Select [Main Menu
Installation
Receiver Upgrade
3. As soon as the "OK" button is pressed, the receiver will detect the new firmware.
FIRMWARE UPGRADE THROUGH TERRESTRIAL
24
The information may include : current time /
channel name, name of the current and
next programme, the start and total time of
the current programme, the start and total
time of the next programme.
Programme information will be available
only when it is included in the transmission.
When you press the "♬" key, you can
alternatively select TV or radio channel
guide.
Press the "MENU" key or "EXIT" key to
return to the previous menu.
Upgrade via Terrestrial]

8. TROUBLESHOOTING

About the Receiver
Problem
Does not display LED on the
- Connect the power cord to the power outlet
front panel or the receiver has no
properly.
power.
- Check if the receiver is in standby mode.
- Check if the video output port is firmly
connected to the TV.
No pictures on the screen
- Check if you have selected the correct
channel or video output on your TV.
- Connect the audio cords properly.
- Check the volume level of the TV.
No sound
- Press the "MUTE" key.
- Point the remote control directly towards the
Remote control does not operate
receiver.
- Check and replace batteries.
- Check the signal strength in the "Automatic
Channel Search" menu.
On - Screen Error Messages
- Connect the cable properly.
Searching signal
- Check the signal strength in the "Automatic
Channel Search" menu.
Unrecognized Smart Card
- Check the Smart Card.
Please insert your Smart Card
- Insert the Smart Card.
Solution
TROUBLESHOOTING
25

Advertisement

Table of Contents
loading

Table of Contents