Assembly; Echo Approved Optional Equipment; Echo Approved Optional Attachments; Power Head Shaft Lower Shaft Assembly - Echo SRM-211SB Operator's Manual

Grass trimmer/brush cutter echo srm-211sb

Hide thumbs Also See for SRM-211SB:

Table of Contents

SSEMBLY

Use only ECHO approved attachments for these models. Serious injury may result from the use of non approved

attachment combinations. Read and comply with all safety instructions listed in this manual and attachment manual.

ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been

tested and approved by ECHO for use with these units.

SRM Edger Attachment

SRM Cultivator Attachment

SRM Trimmer Attachment

SRM Hedge Clipper Attachment

SRM Power Pruner

Attachment

POWER HEAD SHAFT

Tools Required: None

Parts Required: Power Head Shaft, Lower Shaft Assembly

1. Set Power Head/Shaft Assembly on a level surface.

2. Loosen clamping knob (A).

3. Pull locator pin (B) and rotate counter clockwise 1/4 turn to lock

out position.

4. Carefully fit lower drive shaft assembly into coupler (C) to decal

assembly line (D), making sure that the inner lower drive shaft

engages into the upper drive shaft mount.

NOTE

Lower bearing housing and head assembly must be in line with the

engine.

WARNING

#99944200470

#99944200510

#99944200540

#99944200480

#99944200530

LOWER SHAFT ASSEMBLY

DANGER

Table of Contents