Table of Contents
Advertisement
4
Press
or
v
V
adjust the playback tone.
: Adjusts the sounds by a halftone
v
higher each time this button is pressed
(from #1 to #6).
: Adjusts the sound by a halftone lower
V
each time this button is pressed (from 21
to 26).
The playback tone is set to "0" when you
purchase the IC recorder.
5
Press
/ENT to exit the setting mode.
N
To resume normal playback
speed and sounds
Slide the DPC(SPEED)/KEY CTRL switch
to "OFF."
P Note
When the playback speed is in a range from
2.10 times to 3.00 times, the noise cut function
(page 60) and the effect function do not work.
64
GB
on the control button to
Current setting
DPC setting
Key control setting
Selecting the sound effect
You can set the effect you want for the
playback in the menu.
1
(Playback) tab t "
Select the
in the menu when the IC recorder is in
the stop or playback mode, and then
press
N
/ENT.
The menu items will be different
depending on the model you are using.
x STOP
v , V
N /ENT
. , >
효과
"
Advertisement
Table of Contents
