Table of Contents
Advertisement
Symptom
The IC recorder is powered
off automatically.
The IC recorder does not
operate correctly.
It takes a long time for the IC
recorder to start.
The IC recorder does not
operate.
The IC recorder does not
operate, even if you press
any button.
No sound comes from the
speaker.
Sound comes from the
speaker even when the
headphones are plugged in.
The operation indicator does
not light.
140
GB
Remedy
• When the IC recorder is in the stop mode and you leave the IC
recorder without attempting an operation for a certain length of
time, the auto power off function will take effect. (The length of
time before auto power off is set to "
IC recorder.) You can select the length of time before auto power
off takes effect in the menu (page 107).
• Take out the batteries and insert them again.
• If the IC recorder is required to process a large amount of data, it
may take longer for the IC recorder to start. This is not a
malfunction of the IC recorder. Wait until the start-up display
disappears.
• You may have formatted the memory of the IC recorder using the
computer. Use the IC recorder formatting function to format the
memory (page 108).
• The batteries are weak (page 14).
• The power to the IC recorder is off. Slide the POWER/HOLD
switch in the direction of "POWER" for more than 1 second
(page 15).
• The HOLD function is activated. Slide the POWER/HOLD switch
in the center direction (page 11).
• The volume is turned down completely (page 26).
• Headphones are plugged in (page 58).
• If you plug in the headphones not securely during playback, the
sound may come from the speaker. Unplug the headphones, and
then insert them securely.
끔
• "LED" is set to "
." Display the menu and set "LED" to "
(page 104).
10분
" when you purchase the
켬
"
Advertisement
Table of Contents
