Model GXT2000/2050 Series
CHARGING THE BATTERY PACK
Your GXT2000/2050 Series is equipped for using a rechargeable Li-
Polymer battery pack which can be recharged using a desktop
charger. For maximum battery life, we recommend charging the
battery pack when the low battery icon comes on. Remove the radios
from the charger when the charge time expires.
To charge using a Desktop Charger:
1. Place the rechargeable battery packs in the radios.
2. Connect the AC adapter into an AC wall outlet.
3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if
charging in vehicle) into the desktop charger jack.
4. Place the units into the desktop charger slot and note that the LED
indicator with RED color will light up, indicating charging function.
Once the battery pack is adequately charged the LED indicator will
change its color to GREEN.
In order to ensure that the battery pack is fully charged, it is
recommended that the battery pack be charged with the radio
turned OFF.
1. Only use our Li-Polymer battery pack.
!
2. Do not attempt to charge alkaline batteries or any batteries
or battery packs other than the one indicated in the manual.
This may cause leakage and damage to the radio.
3. For long term storage of the radio, turn the radio OFF and
remove the batteries from the radio.
BATTERY LEVEL INDICATOR
Your GXT2000/2050 Series has a BATTERY LEVEL METER
that shows the battery power level. The greater the number of bars
visible, the stronger the battery level. When the battery level is low,
the Battery Shell
icon and "Lo bt" will flash in the display
indicating your batteries should be replaced or recharged if using a
rechargeable battery pack.
Page 6
www.midlandusa.com