Setting Privacy Codes; Transmit (Tx) Power Level Selection - Midland X-TRA Talk GXT2000 Series Owner's Manual

Model GXT2000/2050 Series

SETTING PRIVACY CODES

When the GROUP Mode is turned off, you can use the normal Privacy
Codes with other radios that do not have Group Mode function. Your
GXT2000/2050 Series has 142 Privacy Codes available which can
only be used on channels 1~22. The selected Privacy Code may be
different for each channel. To select a Privacy Code for the current
channel press the MENU button twice, and then the
select between "Off/CTCSS/DCS". Press the MENU button again
/
and the buttons to select one of the 38 CTCSS Codes or one of
the 104 DCS Codes.
The Privacy Code icon on the display will indicate whether you set
your Privacy Code in CTCSS or DCS mode. To confirm the selection,
press the PTT button or press the MENU button again to move to the
next feature setting.
Note : If you select a CTCSS Privacy Code, any pre-selected
DCS Privacy Code will be cancelled and vice-versa.
!
Selecting a Privacy Code of "oF" will disable the Privacy
feature. To communicate between two GXT2000/2050
Series radios, all radios in your group must be set to the
same channel and Privacy Code selections. The Privacy
Code can only be set in channels 1~22.

TRANSMIT (TX) POWER LEVEL SELECTION

Your GXT2000/2050 Series has 3 power level settings. To select the
power level on channels 1~7, 15~33 and 38~50, press the MENU
button until a "Pr" icon will appear blinking on the display. Then press
/
the buttons to select TRANSMIT POWER LEVEL icon (H: Hi/
M: Med/L: Lo). To confirm, press the PTT button or press the MENU
button again to move to the next feature setting. When the Battery
Meter drops to 1 bar , the TX Power will automatically switch
from Hi(H) or Med(M) to Lo(L) level.
!
Note : You cannot adjust the power setting on the FRS
channels (8~14 and 34~37). They are set to Low power per
FCC regulations.
Page 10
/
buttons to
www.midlandusa.com