Midland X-TRA Talk GXT2000 Series Owner's Manual page 8

Model GXT2000/2050 Series
GXT2000/2050 SERIES QUICK REFERENCE CHART
MENU Channel Privacy Power
Off H/M/L
1~50
Press and hold the
MENU
Whisper
MENU button for
CTCSS
1~38
5 seconds
WX Scan
1~10
DCS 1~104 On/Off
*** Only on Ch 1 ~ 22
WX Channel
1~10
WX Alert
On/Off
MONITOR
Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting. Press and hold the MONITOR
button for 1 second again to get out of MONITOR mode.
SCAN
Your GXT2000/2050 Series can scan all 50 channels for activity. To
enter, quickly press the SCAN button. Repeat the same procedure to
exit. Your radio will rapidly scan each of the 50 channels and stop on
any active channel. Your radio will resume scanning after 4 seconds
when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when PTT button is no longer
pressed.
To resume scanning, quickly press the
Page 8
1~15 for GXT2050
eVOX Roger Beep Call Tone Vibrate
Silent Operation
1~10 On/Off
oF~9 On/Off On/Off
Dual Watch *** Only on Ch 1 ~ 22
Dual Watch
Channel Privacy
Off DCS
CTCSS
1~50
1~38 1~104
DUAL WATCH FUNCTION
Press and hold
the DOWN
button for 5
seconds
SOS
/
button.
www.midlandusa.com