Call Alert; Keypad Lock; Channel Selection (Gmrs/Frs Band); Setting Privacy Codes - Midland X-Talker T10 Instruction Manual

Model T10 & T30 Series

CALL ALERT

Your radio can transmit a call alert. To send a call alert, press the
CALL button. The TX icon will appear while transmitting a call alert
and a tone can be heard on the speaker for confirmation.

KEYPAD LOCK

To avoid accidentally changing the radio setting, press the
LOCK
button for 3 seconds. The
PTT and CALL will still be active. Repeat the same procedure to
unlock the keypad.

CHANNEL SELECTION (GMRS/FRS BAND)

Press the MENU button once, and then the
one of the 22 GMRS/FRS channels. To confirm the selection, press
the PTT button or press the MENU button again to move to the next
feature setting.
Your radio has 38 Privacy Codes available. The selected Privacy

SETTING PRIVACY CODES

Code may be different for each channel. To select a Privacy Code
for the current channel press the MENU button twice, and then the
L L \ M M
buttons to select one of the 38 CTCSS Codes. The Privacy
Code icon on the display will indicate CTCSS mode. To confirm the
selection, press the PTT button or press the MENU button again to
move to the next feature setting.
Note : Selecting a Privacy Code of "oF" will disable the Privacy
feature. To communicate between two radios, all radios in your
group must be set to the same channel and/or Privacy Code
selections.
Page 9
icon will appear on the display.
L L \M M
buttons to select
midlandusa.com