Mounting the Lens
Pin layout for the lens iris output connector
No.
DC type lenses
1
Damping -
Damping +
Drive +
4
Drive -
VIDEO type lenses
Vcc (+9V)
Not used
Video
Ground
Rewire the lens iris plug
1.
Cut off the plug of the lens cable, cut off approxi-
mately 8mm of the insulation, and then strip
approximately mm of the ends of the cable
sheaths.
8mm
.
Solder the ends of the cable wires to the ends of
the pins, and then attach the cover of the lens iris
plug.
2mm
15