Pre-Ride Checklist; Usage; Safety Gear - Razor E100 Series Owner's Manual

PRE-RIDE CHECKLIST

Brake
Check the brakes for proper function. When you squeeze the
lever, the brake should provide positive braking action. Make
sure that brakes are not rubbing when the lever is released.
Tires
Periodically inspect the tires for excess wear and regularly check
the tire pressure. Reinfl ate as necessary.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb
or object and wreck, bend or break a frame. Get in the habit of
inspecting your scooter on a regular basis.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts, cables,
fasteners, etc., to ensure they are secure and assembled correctly.
There should not be any unusual rattles or sounds from loose
parts or broken components. If the unit is damaged, do not ride.
Reference "Safety Warnings" on page 1 of this manual.

USAGE

How to Ride
To start unit, turn on power switch; place both hands on handlebars and kick start the unit using one foot to push
scooter forward while applying the throttle with right hand. The scooter must accelerate to 3 mph/5 kmh for
motor to engage. LED lights are activated when the throttle is applied (E100 Glow only).
How to Stop
To stop unit, release the throttle and apply the brake until the unit comes to a complete stop.
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.

Safety Gear

Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always wear
athletic shoes (lace-up shoes with rubber soles) and keep shoelaces
tied and out of the way of the wheels, motor and drive system.
NEVER RIDE BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Insurance
Do not assume that your existing insurance policies necessarily
provide coverage for scooter use. Check with your insurance
company for information regarding insurance.
5
Note: Electric scooter must
be moving at 3 mph/5 kmh
while engaging throttle to
engage motor.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when the
hand brake is applied.