Pre-Ride Checklist; Usage - Razor Sonic Glow Owner's Manual

PRE-RIDE CHECKLIST

HEADLINE
Brake
Check the brake for proper function. When you step on the
rear-fender brake, the brake should provide positive braking
action. When you apply the brake with the throttle on/
engaged, the brake cut-off switch should cut power to
the motor.
Wheels
Periodically inspect the wheels for excessive wear.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken
frames are rare, it is possible for an aggressive rider to run into
a curb or object and wreck, bend or break a frame. Get in the
habit of inspecting your scooter on a regular basis.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts,
fasteners, etc., to ensure they are secure and assembled
correctly. There should not be any unusual rattles or sounds
from loose parts or broken components. If the product is
damaged, do not ride. Reference "Safety Warnings" on
pages 1 and 2 of this manual.

USAGE

Starting the Scooter
Turn power switch "ON"; put kickstand up and place both hands on the handlebars.
Place one foot on the deck plate and with the other foot, push (kick to start) scooter while pressing down on the
thumb throttle (A). Place other foot on deck plate once motor has engaged.
A
Stopping the Scooter
For controlled stops, release throttle (A) and apply the brake by pressure on the rear-fender brake. Razor recommends
that you practice applying the brake at various speeds and in an open area free from obstructions before riding your
scooter around others. Step on the rear-fender brake (B), the power will cut off and then product will slow to a stop.
A
Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always
wear athletic shoes (lace-up shoes with rubber soles) and keep
shoelaces tied and out of the way of the wheels, motor and drive
system. NEVER RIDE BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Insurance
Do not assume that your existing insurance policies necessarily
provide coverage for product use. Check with your insurance
company for information regarding insurance.
Storage
Prolonged exposure to uv rays, rain and the elements may
damage the enclosure materials, store indoors when not
in use.
B
5 5
Note: Scooter must accelerate
to at least 3 mph (5 km/h) for
motor to engage.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when the
brake is applied.
Note: Motor will re-engage,
(without having to kick to start),
if brake is released and throttle is
pressed before scooter has slowed
down to under 3 mph (5 km/h).