Toyota Corolla 2010 Quick Reference Manual page 38

Hide thumbs Also See for Corolla 2010:
Table of Contents

Advertisement

1-2. Opening, closing and locking the doors and trunk
Switching the door unlock function
It is possible to set which doors the entry function unlocks.
Turn the "ENGINE START STOP" switch OFF.
STEP
1
STEP
2
When the indicator on the key surface is off, press and
hold
pressing
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat step 2.)
Unlocking doors
Hold the driver's door handle to unlock
only the driver's door.
Hold the front passenger's door han-
dle to unlock all doors.
Hold either front door handle to unlock
all doors.
Battery-saving function
In the following circumstances, the entry function is disabled in order to pre-
vent the vehicle and electronic key batteries from discharging.
When the entry function has not been used for 2 weeks or more
When the electronic key has been left within approximately 6 ft. (2 m) of
the vehicle for 10 minutes or more
The system will resume operation when...
The vehicle is locked using the door handle lock switch.
The vehicle is locked/unlocked using the wireless remote control func-
tion. (→P. 33)
The vehicle is locked/unlocked using the mechanical key. (→P. 408)
28
,
, or
on the key.
I n f o r ma t i o n P r o v i d e d b y :
for approximately 5 seconds while
Beep
Exterior: Beeps three times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents