Toyota Corolla 2010 Quick Reference Manual page 139

2-1. Driving procedures
Engine (ignition) switch (vehicles without smart key system)
■
Starting the engine
Automatic transmission
STEP 1
Check that the parking brake is set.
STEP 2
Check that the shift lever is set in P.
STEP 3
Sit in the driver's seat and firmly depress the brake pedal.
STEP 4
Turn the engine switch to the "START" position and start
the engine.
1.8 L 4-cylinder (2ZR-FE) engine: The engine will crank until it
starts or for up to 25 seconds, whichever is less. If you turn the
engine switch, the engine will keep cranking for about 30 seconds
maximum.
Continue depressing the brake pedal until the engine is com-
pletely started.
Manual transmission
STEP 1
Check that the parking brake is set.
STEP 2
Check that the shift lever is set in N.
STEP 3
Firmly depress the clutch pedal.
STEP 4
Turn the engine switch to the "START" position and start
the engine.
1.8 L 4-cylinder (2ZR-FE) engine: The engine will crank until it
starts or for up to 25 seconds, whichever is less. If you turn the
engine switch, the engine will keep cranking for about 30 seconds
maximum.
Continue depressing the brake pedal until the engine is com-
pletely started.
130
I n f o r ma t i o n P r o v i d e d b y :