Toyota Corolla 2010 Quick Reference Manual page 135

2-1. Driving procedures
Engine (ignition) switch (vehicles with smart key system)
Performing the following operations when carrying the electronic
key on your person starts the engine or changes "ENGINE START
STOP" switch modes.
■
Starting the engine
STEP 1
Check that the parking brake is set.
STEP 2
Check that the shift lever is set in P.
STEP 3
Sit in the driver's seat and firmly depress the brake pedal.
The "ENGINE START STOP" switch indicator turns green. If the
indicator does not turn green, the engine cannot be started.
STEP 4
126
Press the "ENGINE START
STOP" switch.
The engine will crank until it
starts or for up to 25 seconds,
whichever is less. If you press
and hold the "ENGINE START
STOP" switch, the engine will
keep cranking for about 30
seconds maximum.
Continue depressing the brake
pedal until the engine is com-
pletely started.
The engine can be started
from any mode.
I n f o r ma t i o n P r o v i d e d b y :