Toyota Corolla 2010 Quick Reference Manual page 338

STEP 4
Vehicles with smart key system: Wait for a few minutes with
STEP 5
the IGNITION ON mode, and then turn the "ENGINE START
STOP" switch OFF.
Vehicles without smart key system: Wait for a few minutes
with the engine switch in the "ON" position, and then turn the
engine switch to the "LOCK" position.
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code of tire pressure
warning valve and transmitter. Have the ID code registered by your
Toyota dealer.
Push and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times.
I n f o r ma t i o n P r o v i d e d b y :
4-3. Do-it-yourself maintenance
4
331