Toyota Corolla 2010 Quick Reference Manual page 325

4-3. Do-it-yourself maintenance
■
Engine oil consumption
●
The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.
●
More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
●
A new engine consumes more oil.
●
When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level accu-
rately.
●
Oil consumption: Max. 1.1 qt./600 miles, 0.9 lmp. qt./600 miles (1.0 L per
1000 km)
●
If you consume more than 1.1 qt. (1.0 L, 0.9 lmp. qt.) every 600 miles
(1000 km), contact your Toyota dealer.
■
After changing the engine oil (U.S.A. only)
The engine oil maintenance data should be reset. Perform the following pro-
cedures:
STEP 1 Turn the "ENGINE START STOP" switch or engine switch OFF with
the trip meter A reading shown.
STEP 2 While pressing the trip meter reset button (→P. 143), turn the
"ENGINE START STOP" switch or engine switch ON.
STEP 3 Continue to press and hold the button until the trip meter displays
000000.
318
I n f o r ma t i o n P r o v i d e d b y :