Adjusting The Lubrication; Lubricating The Needle Head Parts; Hook Lubrication - Pfaff 1163 Instruction Manual

Care and maintenance
11

Adjusting the lubrication

.03
11

Lubricating the needle head parts

.03.01
11

Hook lubrication

.03.02
11 - 3
+
-
Fig. 11 - 03
1
Fig. 8 - 09
The needle head parts should be
adequately lubricated without oil dripping
out of the head part.
The amount of oil for lubricating the head
parts is adjusted by turning screw 1.
1
Remove the needle.
Dismount the needle plate and bottom
feed dog.
Place a sheet of paper over the needle
plate cutout and start the machine
running.
If a thin streak of oil is visible on the
paper after a running time of approx. 10
seconds at top speed, the hook
lubrication is set correctly.
To adjust the amount of oil, turn
adjustment screw 1.
The following adjustments may
only be carried out by
appropriately trained personnel.