Product Overview; Adjusting The Control Cable; Operation - Toro CCR 6053 R Quick Clear Operator's Manual

Note: You may tip the machine forward (handle
up) a little to make adding oil easier. Remember to
return the machine to the operating position before
checking the oil level.
Important: Do not tip the machine all the way
forward onto its nose, or fuel may leak out of
the machine.
5. Screw the oil fill cap into the oil fill hole and tighten
it securely.
4

Adjusting the Control Cable

No Parts Required
Procedure
Refer to Adjusting the Control Cable in Maintenance.

Product Overview

1. Chute deflector trigger
2. Discharge chute
3. Fuel tank cap
4. Control bar
5. Quick Shoot™ control
6. Recoil start handle
7. Primer

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
DANGER
Gasoline is extremely flammable and explosive. A
fire or explosion from gasoline can burn you and
others.
• To prevent a static charge from igniting the
gasoline, place the container and/or machine
on the ground before filling, not in a vehicle or
on an object.
• Fill the tank outdoors when the engine is cold.
Wipe up spills.
• Do not handle gasoline when smoking or around
an open flame or sparks.
• Store gasoline in an approved fuel container, out
of the reach of children.
• Do not tip the machine backward with fuel in
the fuel tank; otherwise, fuel may leak out of
the machine.
8
Figure 10
8. Electric-start button
(model 38569 only)
9. Ignition key
10. Choke lever
11. Oil drain plug
12. Oil fill cap
13. Chute deflector