IR control
It is fully compatible with the IRC (Infrared Remote Control),please follow below to setup.
Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
Use <UP> or <DOWN> to select S-1r, Press <ENTER>, Begin using the IRC
The functions of IRC:
Automatic Mode
Automatic Mode will enable you to run the automatic programs on the
Press AUTO on the IRC.
or - to choose different auto programs.
To adjust the speed of the automatic program.
SPEED on the IRC
or - to either increase or decrease the speed of the program.
Sound Active Mode
Active Mode will enable the product to respond to music and follow
actions.
sound button.
Adjust the sound sensitivity.
sensitivity button.
or - to either increase or decrease sound sensitivity.
Manual Color Control.
To choose a specific color with the IRC.
Press MANUAL on the IRC.
Press any number between 0-9 to choose your color.
To manually control the RGB percentage.
Press MANUAL on the IRC.
Press R, G, or B to choose your color.
Press the number (percentage) you desired
Press the button of %.
For example:
[MANUAL] -> [R] -> [5] -> [0] -> [%], red changes as 50%.
strobe control.
Follow below actions.
Press the strobe button on the IRC, Use + o - to adjust strobe speed.
Fade/snap.
Press the button of Fade/snap, Use + or - to adjust speed.
BLACK OUT.
Use the button of BLACK OUT to turn on or turn off.
Press the BLACK OUT to turn off.
Press Auto button to turn on and press BLACK OUT to turn on or turn off with power of the product.
- 9 -
product.
Press +
Press
Press +
Sound
below
Press
Press
Press +