Act Mode Standalone) - Beamz 150.568 Manual

Act mode Standalone)

Set the product in one of the standalone modes to control without connecting a DMX controller.
Note: Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX
controller.
Follow below actions to setup standalone mode
Press <MODE> repeatedly until SYS,ACt,SLAv,or S-1r shows on the display.
Use <UP> or <DOWN> to select Act
Press <ENTER>
Use <UP> or <DOWN> to choose your desired program (A000-A023).
Press <ENTER>
Note: Certain programs will have additional functionality. To find these options, press <ENTER> after selecting an
auto program. Then press <UP> or <DOWN>. Not every program will feature all the added functionality.
Function: F000 - F100
Description: Flash speed
(slow to fast)
Please refer to below:
Display Function
A000 Black
A001 Red
A002 Green
A003 Blue
A004 Yellow
A005 Purple
A006 Cyan
A007 White
A008 Color Change
A009 Action 1
A010 Action 2
A011 Action 3
A012 Action 4
A013 Action 5
A014 Action 6
A015 Action 7
A016 Action 8
A017 Action 9
A018 Action 10
A019 Action 11
A020 Action 12
A021 Any Color
A022 Color Fade
A023 Auto Run
SL.00 – SL.32 P000 – P100
Sound sensitivity Run speed
(slow to fast)
Run Speed (P)
Run Speed
Automatic
0 – 50
Run Speed
Sound
51 – 100
0 – 100 (red)
0 – 100
0 – 100
C000 – C1000
Dimmer
Flash Speed (F)
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100 (green)
- 8 -
Color (C)
0 – 100 (blue)