Adjusting The Front Fork; Compression (Tc-Txc: Top Adjuster; Rebound; Bleeding - Husqvarna TC - TE 449 2013 I.E. Manual

ADJUSTING THE FRONT FORK

a) COMPRESSION (TC-TXC: TOP ADJUSTER; TE: LOWER
ADJUSTER)
Standard setting: -11 clicks (TC - TXC);
Standard setting: -10 clicks (TE)
To reset standard calibration, turn adjuster screw (A)
clockwise to reach the fully closed position; then turn it
back by the mentioned clicks. In order to obtain a smooth
braking action, turn the adjuster counter clockwise. Vice
versa to obtain a harder braking action.
TC-TXC
D
A
TE
A
b) REBOUND (TC-TXC): LOWER ADJUSTER; TE: TOP ADJUSTER)
Standard setting: -14 clicks (TC - TXC);
Standard setting: -14 clicks (TE).
To reset standard calibration, turn adjuster (C) clockwise
to reach the fully closed position; then, turn it back by
the mentioned clicks. In order to obtain a smooth braking
action, turn the adjuster counter clockwise. Vice versa to
obtain a harder braking action.
TE
C
TC-TXC
C
SPECIFICATIONS - OPERATION - MAINTENANCE
c) BLEEDING (to carry out after each competition, or monthly).
Set the motorcycle on a central stand, release the fork
fully extended and loosen the air vent valve (D). Once
this operation is over, tighten the valve.
WARNING*: Never force the adjusting screws
beyond the maximum open and closed posi-
tions.
D
EN - 37