Overview Of Controls - Hensel Pro MINI 1200 AS User Manual

5
HENSEL-VISIT International GmbH

Overview of controls

Panel Pro Mini generator
1 Mains connector
2 ON / OFF: Main switch
3 SLOW: Slow charge (LED indicator)
4 RC / CH: radio receiver ON (LED indicator)
and channel selection
5 LED display for flash power / channel A
6 AUDIO:
Acoustical signal for flash readiness ON (LED
indicator)
7 FC: Flash Check ON (LED indicator)
8 Dial for setting the flash power
9 SLAVE: Slave ON (LED indicator)
10 LAMP:
Modeling lamp OFF / FULL / PROP (LED indicator)
11 LED display for flash power / channel B
12 Ready indicator for flash readiness
13 Slave, built-in
14 SYNC: Synchronization socket
15 TEST: Manual flash release
16 Socket A1
17 Socket A2
18 Socket B1
19 Socket B2
20 Switch for reducing the flash power
Full power - minus 300 J - minus 450 J
21 Switch from symmetric to asymmetric mode
22 Switch for reducing the flash power
Full power - minus 300 J - minus 450 J
Radio flash trigger and power control system
Strobe Wizard Plus - transmitter
23 Flash power decrease button
24 Flash power increase button
25 Modeling Lamp ON / OFF switch
26 Channel selector for 3 channels and option „All„
27 TEST: Manual flash release
28 SYNC / RC: Synchronization socket
29 Locking screw for mounting
to the hot shoe of the camera
30 Screw for opening the battery compartment
User manual // Pro Mini 1200 AS Power Pack
33