Dodge Journey 2014 Owner's Manual page 335

When making a selection, touch the soft-key to enter the
desired mode. Once in the desired mode, touch and
release the preferred setting until a check-mark appears
next to the setting, showing that setting has been se-
lected.
Once the setting is complete touch the Back Arrow
soft-key to return to the previous menu or touch the "X"
soft-key to close out of the settings screen. Pressing the
Up or Down Arrow soft-keys on the right side of the
screen will allow you to toggle up or down through the
available settings.
Display
After pressing the Display soft-key the following settings
will be available.
UNDERSTANDING YOUR INSTRUMENT PANEL 333
• Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, touch and
release the "Day," "Night" or "Auto" soft-key. Then
touch the back arrow soft-key.
• Display Brightness With Headlights ON
When in this display, you may select the brightness with
the headlights on. Adjust the brightness with the "+" and
"–" setting soft-keys or by selecting any point on the scale
between the "+" and "–" soft-keys. Then touch the back
arrow soft-key.
• Display Brightness With Headlights OFF
When in this display, you may select the brightness with
the headlights off. Adjust the brightness with the "+" and
"–" setting soft-keys or by selecting any point on the scale
between the "+" and "–" soft-keys. Then touch the back
arrow soft-key.
4