Dodge Journey 2014 Owner's Manual page 326

324 UNDERSTANDING YOUR INSTRUMENT PANEL
• Show Time Status
Touch the "Show Time Status" soft-key to change this
display. When in this display, you may turn on or shut off
the digital clock in the status bar. To change the Show
Time Status setting, press and release the "ON" or "OFF"
soft-key. Then touch the back arrow soft-key.
• Sync Time — If Equipped
Touch the "Sync Time" soft-key to change this display.
When in this display, you may have the radio set the time
automatically. To change the Sync Time setting, press and
release the "ON" or "OFF" soft-key. Then touch the back
arrow soft-key.
Safety / Assistance
• Park Assist
Touch the "Park Assist" soft-key to change this display.
The Rear Park Assist system will scan for objects behind
the vehicle when the transmission shift lever is in RE-
VERSE and the vehicle speed is less than 11 mph
(18 km/h). The system can be enabled with Sound Only,
Sound and Display, or turned OFF. To change the Park
Assist status, press and release the "OFF," "Sound Only"
or "Sounds and Display" soft-key. Then touch the back
arrow soft-key. Refer to "ParkSense® Rear Park Assist" in
"Understanding The Features Of Your Vehicle" for sys-
tem function and operating information.
• Hill Start Assist — If Equipped
Touch the "Hill Start Assist" soft-key to change this
display. When this feature is selected, the Hill Start Assist
(HSA) system is active. Refer to "Electronic Brake Control
System" in "Starting And Operating" for system function
and operating information. To make your selection, touch
the "Hill Start Assist" soft-key and select "ON" or "OFF."
Then touch the back arrow soft-key.