Setting Alarms - La Crosse Technology Radio-Controlled Travel Alarm Clock WT-2160 Instruction Manual

III.
SETTING THE ALARMS
La Crosse Technology's travel alarm clock
has two separate alarms that can be set.
Each alarm has a distinctive sound and
operate independently.
A.
Press and hold the "ALM1" (or
"ALM2" key) key for two seconds to enter
the setting mode. The alarm time will
flash. Press the "HOUR" key to advance
the hour of the alarm, and press the "MIN"
key to advance the minutes of the alarm. If
no button is pressed within fifteen seconds,
the alarm will set and will activate, and
the clock will revert to the normal
operating screen. The picture below shows
both alarms activated.
B.
To activate/deactivate the alarm, press
"Alarm 1"
activated
"Alarm 2"
activated
9