Table of Contents
Advertisement
Quick Links
Introduction:
Congratulations on purchasing the Atomic Alarm Clock with WWVB Radio controlled time,
calendar, 12/24 hours display, time zone with US map, indoor temperature and two alarms
settings. This innovative product is ideal for home or office use. Please read this instruction
manual to enjoy the full benefits of all the features.
Snooze button
Function keys
Features:
•
WWVB Radio controlled time with manual setting option
•
12/24 hour time display
•
Time zone with USA map (Pacific Time(-8h); (Mountain Time (-7h); Central Time (-6h);
Eastern Time(-5h) or GMT
•
Automatic or manual ON/OFF daylight saving time
•
Indoor temperature reading (ºC/ºF user selectable)
•
2 alarm times (crescendo and normal sounding alarms)
•
snooze interval setting (from 1 to 59 minutes)
•
Calendar display (weekday/month/date or month/ date/year)
•
LCD back-light
Setting up the Atomic Alarm Clock:
The clock uses 1 x AA LR6 battery (Alkaline recommended). To set please follow these easy
steps:
Battery
compartment
1. Slide the battery cover downwards as indicated by the triangle to reveal the battery
compartment
2. Observing the correct polarisation insert the battery.
3. Replace battery cover.
Atomic Alarm Clock
Instruction Manual
Battery
compartment
Battery cover
1
Advertisement
Table of Contents
Related Manuals for La Crosse Technology WT-2100
Summary of Contents for La Crosse Technology WT-2100
- Page 1 Introduction: Congratulations on purchasing the Atomic Alarm Clock with WWVB Radio controlled time, calendar, 12/24 hours display, time zone with US map, indoor temperature and two alarms settings. This innovative product is ideal for home or office use. Please read this instruction manual to enjoy the full benefits of all the features.
- Page 2 4. After power-up, the alarm will sound once and all LCD segments will light up briefly. 5. The clock will now start receiving the WWVB time signal and the radio tower icon will start flashing indicating that time reception is being attempted 6.
- Page 3 Using the Atomic Alarm Clock: The clock has five easy to use function keys: Front view MODE/+ key Alarm 1/ Hour ALM 2/Min SET key Using the keys: “SET” key: - Used to enter the programming mode - Used to select and confirm the various setting modes “MODE/+”...
- Page 4 • 12 or 24 hours time display • ºF or ºC indoor temperature display Time zone setting mode: • After pressing the “SET” key, the time zone will now start flashing. Use the “MODE/+” key to change the Time zone between Pacific Time(-8h); (Mountain Time (-7h); Central Time (- 6h);...
- Page 5 12/24 hour select mode: 1. The 12 or 24 hour will start flashing. Choose the desired time display mode by using the “MODE+” key 2. Now press the “SET” key to enter the “Indoor temperature selection” mode. Temperature selection mode: 1.
- Page 6 Should the low battery icon show on the LCD, the battery will need to be replaced. Please participate in the preservation of the environment. Return used batteries to an authorized depot. Specifications: Time source Time frequency Indoor temperature measuring range : Indoor temperature checking interval : Power source Battery life cycle...
- Page 7 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this product. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the unit in for repairs, contact La Crosse Technology. The unit will be repaired or replaced with the same or similar model.
Need help?
Do you have a question about the WT-2100 and is the answer not in the manual?
Questions and answers