Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Radio-controlled Travel Alarm Clock
Table of Contents
Topic
About WWVB
Programming
Daylight on/off
Snooze setting
Setting Alarms
Maintenance, Warranty, Contact information
WT-2191
Page
2
2
2
3
3
3
3
4
4
4
5
5
6
6-7
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for La Crosse Technology WT-2191A
Summary of Contents for La Crosse Technology WT-2191A
- Page 1 Radio-controlled Travel Alarm Clock Table of Contents Topic Inventory of Contents Quick Setup Detailed Setup Guide Battery Installation About WWVB Programming Time zone Daylight on/off Snooze setting Time setting Setting Alarms Operating Screens Traveling Troubleshooting Maintenance, Warranty, Contact information WT-2191 Page...
-
Page 2: Inventory Of Contents
INVENTORY OF CONTENTS Radio controlled clock (figure 1) Instruction Manual and Warranty Card. QUICK SETUP The alarm clock is packed in the closed position. To open, flip open the cover. The alarm clock requires one AA Alkaline battery. Open up the compartment insert the battery to activate. -
Page 3: Programming
PROGRAMMING SETTING THE TIME There are two methods by which the time and date can be set: 1) Automatically via WWVB reception, or 2) Manually. WWVB (Radio-Controlled Time) This method requires you to do nothing, except wait for the signal to be received, and to select a time zone. -
Page 4: Snooze Setting
“Sno” will show at the bottom of the screen, and a number will flash at the top. This is the setting for the length of the alarm snooze. Press the “+” key to advance the length from 0 (no snooze)) to 59 minutes. This sets the time the alarm is silenced after pressing the SNOOZE key while the alarm is sounding. -
Page 5: Operating Screens
When the alarm is sounding, pressing the “SNOOZE” will turn it off for the time that was selected in the programming mode (section II.A.2.c.). The snooze is activated by pressing back on the entire unit while the cover is open. The actual button is on the bottom of the unit and is pressed by the cover when pushed back. -
Page 6: Troubleshooting
TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology via e-mail or phone, or visit our website, www.lacrossetechnology.com Problem: The time and date will not set initially. Solution: It usually takes overnight before the clock can receive the signal due to the interference the sun has on the WWVB signal. - Page 7 La Crosse Technology provides a 1-year warranty on this product. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the unit in for repairs, contact La Crosse Technology. The unit will be repaired or replaced with the same or similar model.
Need help?
Do you have a question about the WT-2191A and is the answer not in the manual?
Questions and answers