Option Setting (Dealer Mode) - Sanyo LCD-30CA1Z Service Manual

Option Setting (Dealer Mode)

How to enter the Option Setting Mode
1.
Turn the TV set on.
2.
Press and hold the MENU key of the TV set, and press the MENU key of the remote control.
3.
To exit from the Option Setting Mode, press the MENU or RECALL key or turn the TV off.
MENU
Dealer Mode
Input select lock
Max. volume
OSD
Menu
System setup
RC
Volume lock
Tuning lock
Inhibit lock
Start mode select
[ Option Setting Mode ]
How to make the Option Setting
Press ▲ or ▼ button on the remote control or the TV set to select the desired option item.
Press or key on the remote control or the TV set to change each option setting.
The data which is set in the Option Setting Mode is stored into the memory automatically.
The following Option Setting can be set up on this TV set.
1. Input select lock (Mode: Yes or No)
Yes: The input (TV, PC, AV1, AV2, AV3 or AV4) of a signal is fixed to the input at the time of a setup.
No: Release.
2. Max. volume (Mode: Yes or No)
Yes: Restriction of the maximum volume. (The volume at the time of a setup is set up as the maximum volume. )
No: Release.
3. OSD (Mode: Yes or No)
Yes: On-screen display is performed. (With a screen display. )
No: On-screen display is not performed.
4. Menu (Mode: Yes or No)
Yes: On-screen menu display is performed. (On-screen menu operation is possible. )
No: On-screen display is not performed. (On-screen menu operation is impossible. )
MENU
S.SYS
MENU
No
No
Yes
Yes
Yes
Yes
No
No
Yes
TV
-13-
BACK
OK OK
C.SYS