Sanyo LCD-30CA1Z Service Manual page 20

Mechanical Disassembly
4. Cabinet Front Removal
1) Remove the Stand, Cabinet Back and the Speakers.
Remove the stand, cabinet back and the speakers with reference to page 12 and page 13.
2) Remove the Cabinet Bottom
Remove Screw-A (3mm x 8mm, 2 screws) and Screw-B (3mm x 12mm, 2 screws) to take the Cabinet Bottom off.
3) Remove the Key Switch
Remove 2 screws (3mm x 10mm) to take the Key Switch (Circuit Board, Cover and the Buttons) off.
4) Remove the Control Board and Power SW Board
Remove 2 screws (3mm x 10mm) to take the Control Board off.
Remove 1 screw (3mm x 10mm) to take the Power SW Board off.
Remove the Jack-B Frame
Remove 2 screws (3mm x 10mm) to take the Jack-B Frame off.
Jack-B Frame
Screw
Screw-A
Screw-B
Screw
Key Switch
-20-
Cabinet Bottom
Control Board
Power SW Board