Dealer Mode - Sanyo CP28WF1 Service Manual

Dealer Mode

Cautions to the dealer!!
When the TV will distributed to the market, it should be reset all received channel by following these procedure.
1. Press the TV/AV button on the TV set for a about 2 seconds until "MEMORY CLEAR" is displayed.
TV/AV MENU
Press and hold for more than 2 seconds
2. Press the Menu button on the TV set while the above On-Screen Display is still on the screen to reset all
received channel. The display will changed in red colour.
TV/AV MENU
3. Wait for a view seconds until the TV is not receive the broadcasting signal. Then turn off the TV.
Note: When the dealer mode is executed, all received channels, picture settings and audio settings will be reset.
All manuals and user guides at all-guides.com
CH
CH
-16-
(displayed in yellow colour)
MEMORY CLEAR
(displayed in red colour)
MEMORY CLEAR