Connecting The Ada305 Speaker System To Computer Without Usb; Ada305 Connection For A Computer Without Usb; Euro Converter Plug - Altec Lansing ADA305 User Manual

Connecting the ADA305 Speaker System to a
Computer without USB
• Before inserting the DIN connectors into the receptacles located in
the back of the subwoofer, notice that the plug connectors and
receptacles are color coded to prevent errors. The right channel is
marked in red and the left channel in white. Also notice that the plugs
have arrows. The arrows should face up for proper insertion into the
receptacles. Press the connectors firmly into the receptacles to make
sure they are fully seated.
• Notice that the inputs are marked in green and the stereo audio
plug is green colored. Plug the stereo audio cable into INPUT 1 or 2

ADA305 Connection for a Computer without USB

Euro Converter Plug

For use in the United Kingdom or country that has adopted the 3-pin 13 amp flat pin plug.
of the subwoofer and to the computer audio line output. INPUTS 1
AND 2 have equal input characteristics, therefore, either input can be
used for the computer audio output or a CD headphone jack.
The ADA305 does not have a power switch. Once the power plug is
inserted into the wall outlet the unit turns on after a short delay. A
green or amber/yellow LED will glow on the right satellite to indicate
power is on. If there is no audio signal is sensed over a long period
of time, the unit turns off. When audio is received or a control is
operated, the speaker turns on automatically.
5