Table of Contents
Advertisement
Quick Links
- 1 Placement of Satellites and Subwoofer
- 2 Connecting the Ada305 Speaker System to Computer with Usb
- 3 Ada305 Connection for a Computer with Usb
- 4 Connecting the Ada305 Speaker System to Computer Without Usb
- 5 Use of Top Panel Controls on Right Satellite Speakers
- 6 In Pro-Logic Mode
- 7 Specifications
- 8 Ada305 Troubleshooting
- Download this manual
User Guide
Altec Lansing
Computer Speaker System
Please Note: In order to switch between
Pro Logic mode and Stereo mode using the
center button on the right satellite speaker,
you must disconnect the USB cable. We
recommend using the Audio Management
Software to switch between Pro Logic mode
and Stereo mode. If you have any questions,
please do not hesitate to contact us at
csupport@altecmm.com.
ADA305
© 1998 Altec Lansing Technologies, Inc., Milford, PA 18337-0277
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Altec Lansing ADA305
Summary of Contents for Altec Lansing ADA305
- Page 1 USB cable. We recommend using the Audio Management Software to switch between Pro Logic mode and Stereo mode. If you have any questions, please do not hesitate to contact us at csupport@altecmm.com. ADA305 © 1998 Altec Lansing Technologies, Inc., Milford, PA 18337-0277...
-
Page 2: Safety Instructions
(including amplifiers) that call the Altec Lansing service line for assistance. produce heat. Power Sources — The appliance should be connected to a power... - Page 3 Computers that are USB (universal serial bus) equipped can control all speaker functions from the computer desktop. The USB output makes it possible to control all functions of the ADA305 with a GUI (graphic user interface) that shows a representation of the amplifier and speakers on the computer screen.
- Page 4 Make sure the plugs are fully seated. insertion into the receptacles. Press the connectors firmly into the The ADA305 does not have a power switch. Once the power plug receptacles to make sure they are fully seated.
- Page 5 CD headphone jack. marked in red and the left channel in white. Also notice that the plugs The ADA305 does not have a power switch. Once the power plug is have arrows. The arrows should face up for proper insertion into the inserted into the wall outlet the unit turns on after a short delay.
- Page 6 MODES other channels. As each channel is selected, the indicator on the The ADA305 is in stereo mode when the round LED light on the previous channel will turn off. Any channel selected can be turned off by depressing the button a second time. After a short time if front of the right speaker glows amber.
-
Page 7: Specifications
Three Year Limited Warranty Specifications ADA305 Altec Lansing Technologies, Inc. warrants to the end user that all of its Drivers (Satellites) Two 3 inch drivers per satellite computer speaker systems are free from defects in material and workmanship in the course of normal and reasonable use for a term... - Page 8 ADA305 Troubleshooting SYMPTOMS POSSIBLE PROBLEM SOLUTION NOTE Distortion Speaker is being overdriven by an Make sure speaker is connected to Depending on your sound card, you may also turn off (i.e. static, amplified audio source. line-out jack (unamplified) of sound amplifier on sound card (check your sound card manual).
Need help?
Do you have a question about the ADA305 and is the answer not in the manual?
Questions and answers