User Guide Altec Lansing Multimedia Speaker System For Digital Audio Visit the Altec Lansing Sound Studio at www.altecmm.com to download Audio Management Software ADA 70 DIGITAL POWERCUBE SYSTEM 1-800-ALTEC-88 © 1998 Altec Lansing Technologies, Inc., Milford, PA 18337-0277...
IMPORTANT To install and operate the Altec Lansing ADA70 Speaker System you must have an enabled USB port with Windows 98 (Insert logo) installed in your computer. DO NOT CONTINUE IF WINDOWS 98 IS NOT INSTALLED IN YOUR COMPUTER If you experience any difficulties with your multimedia speaker system, please call us.
One Year Limited Warranty a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and Altec Lansing Technologies, Inc. warrants to the end user receiver. that all of its computer speaker systems are free from defects...
Introduction Description You are about to enter the extraordinary world of Altec Lansing's The ADA 70 is especially designed for multimedia computer True Digital Audio. Your new patented Altec Lansing Speaker audio. The 3-piece system delivers 34 watts of powerful sound via System is designed like no other in the world.
Figure 2 Package Contents Connecting ADA70 Components 1. Two Speaker Satellites DO NOT CONNECT USB CABLE BETWEEN COMPUTER 2. One Subwoofer with the power cord AND SUBWOOFER UNTIL checking that the ADA 70 3. One Mini Stereo Analog Cable (Green) speaker system is receiving power.
Once the green indicator is off, the master volume control becomes operational. Activating the USB Driver After assuring that the Altec Lansing ADA70 SPEAKER Figure 4 SYSTEM is receiving power, turn on your computer if you have not already done so.
Using Windows 98 Device Driver Unlike other analog audio speakers, your new ADA 70 In order to take full advantage of your new Altec Lansing Multimedia Speaker System communicates with Microsoft Multimedia Speaker System, it is important that everything is Windows 98 to facilitate easy adjustment of volume, bass in the right place in your computer.
ADA70 Troubleshooting SYMPTOMS POSSIBLE PROBLEM SOLUTION NOTE Distortion Volume level may be too high and Make sure speaker is connected to Depending on your sound card, you may also turn off (i.e. static, causing speaker to be overdriven line-out jack (unamplified) and not amplifier on sound card (check your sound card manual).