Sharp FACSIMILE UX-P410 Operation Manual page 75

Redial
You can automatically redial the last number dialled. This procedure can be
used to send a fax or make a phone call.
1
If you are sending a fax, load the
document.
•
If desired, press
resolution and/or contrast.
2
Press once. <REDIAL> appears in the display, followed by the last
number dialled. Make sure the number that appears is the number you
wish to dial.
3
If you are sending a fax, press
begins.
If you are making a phone call, lift the handset. Dialling begins.
Note: If a fax transmission is unsuccessful and DOCUMENT JAMMED
appears in the display, remove the document as explained on page 81. (This
may occur if the other fax machine doesn't respond properly when you
attempt to send the document.)
Sending a Fax by Automatic Dialling
RESOLUTION/
RECEPTION MODE
to set the
START/MEMORY
READY TO SEND
. Dialling and transmission
37