When The Message "Cannot Staple." Appears; To Clear Jammed Staples - Kyocera Mita KM-C1530 Instruction Handbook Manual

Touch Panel Messages
9.5

When the Message "Cannot staple." Appears

When finisher F-8110 or F-8430 is installed and the staples are jammed,
the message shown below appears.
Follow the procedure below to clear the jammed staples

To clear jammed staples

1
Slide the finisher away from the
copier.
2
If finisher F-8430 is installed, open
right-side door FN7.
KM-C1530
9
9-37