Table of Contents
Advertisement
8
H
Fold the printed page in half,
and then check that the test
patterns are aligned. Check that
the widths of both margins are
the same.
H
If the margin widths of the test
patterns are not the same, touch
then touch [Enter].
Setting a higher positive number
makes the margin wider; setting
a higher negative number
makes the margin narrower.
H
Repeat step 3 until the widths of
both margins are the same.
?
What is the standard setting?
§
Before adjusting the third or
fourth paper drawer, enter the
same adjustment value for the
first or second paper drawer and
check the test pattern.
4
In the Expert User's Mode screen, touch [Exit].
5
In the Administrator Mode screen, touch [Exit].
6
In the Utility screen, touch [Exit].
8-32
and
to adjust it, and
Administrator Mode Operations
c
c: 3.0 mm ± 1.0 mm
KM-C1530
Advertisement
Table of Contents
